image
image
 image
image
Downloadable Software and Updates
CTS Dolphin
Dolphin Software Installer v3.4 - 1 April 2008
 Software and Device Drivers for CTS Dolphin Timing System. Install or upgrade your Dolphin sofware with this download.
Windows Utilities
System6 Swimming MET File Printer - 2 April 2007
 This is a utility to run on a Windows-based PC. Using it, you can read the MET files from System 6 Swimming and print out the the data. This utility is NOT for installation directly on a System 6.
System 6
Direct Connection to the Internet:
This method requires Sport Loader version 1.104 or higher. With this method, you connect your System 6 directly to a network connection to the Internet via its Ethernet port. The System 6 will upgrade to the latest versions of the software that you have purchased.
Download Instructions

Floppy/USB disk method:
After downloading, check the contents of the disk to verify that the capitalization and extension are intact as follows:

Diving.1.0
PaceClock.1.0
Swimming.1.0
Synchro.1.0
WaterPolo.1.0
System6

If it has been truncated or changed in any way, please rename the file accordingly.

With the System 6 sports timer turned on, place the disk with the successfully loaded sport module into the floppy disk drive, or, if your timer is USB capable, place the USB Flash Drive in either of the USB Ports. From the main screen (displaying the Colorado Time Systems logo), press the 'Install' softkey followed by "Install from Floppy" or "Install from USB" and allow the sport module to fully load. The screen will display a box indicating which files are being installed; when this box disappears, the module has been installed.

Swimming 1.218 - 7 Oct 2008
 Current Release Notes.
 NOTICE!!! This update requires Firmware v1.32 or greater.
To easily obtain this and all other updates at once, use the System 6 online update system (see instructions).
  • Further improvements of single-line (0F) scoreboard
  • Race Distance remains the same when change event number if no event sequence has been programmed
  • Fixed several potential "lock-up" scenarios
  • Added support for USB printing (Requires hardware update)

    • Previous Version Release Notes

    Water Polo 1.118 - 20 Nov 2008
    Current Release Notes.
     NOTICE!!! This update requires Firmware v1.36 or greater.
    To easily obtain this and all other updates at once, use the System 6 online update system (see instructions).

  • Fixed minor issue with shot clock not displaying properly when game time was stopped if game time was less than shot clock reset value
  • A new game is now automatically started if the deafault setups are lodad

  • Click here for updated AquaLink to handle running time with 1/10ths in DisplayLink

    • Previous Version Release Notes


    Diving 1.202 - 30 October 2008
    Current Release Notes.
  • Added back "Alpha Export" feature, now accessed with serial command instead of button sequence
  • Added back "Export Event" feature, now accessed with serial command instead of button sequence
  • Added support for USB printing (Requires hardware update)

    • Previous Version Release Notes


    Sport Loader 1.116 - 30 October 2008
  • The MAC address of the network card is now displayed on the Network Information screen. This can be used for networks that have MAC address restrictions.
  • Allow background images other than 640x480 (requires hardware upgrade)
  • Improved network settings interface
  • Improved reliablilty of SportLoader updates (reduces likelihood of "white-screen" failures)
  • Added menu structure for management of USB printers (requires hardware upgrade)
  • Added support for System updates via USB (requires hardware upgrade)
    •
    Previous Version Release Notes

    Download default desktop image now

    You may install a desktop background image for your timer. Any jpeg formatted image with a width of 640 pixels and a height of 480 pixels can be used. The default System 6 aquatic sports image is available from the link above. Save your image to the floppy disk.
    Installation Instructions

  • With the System6 sports timer powered on, place the disk with the successfully loaded files into the floppy disk drive.

  • From the main screen, press the 'Install' softkey. If installation does not begin at this time, press the 'Install from floppy' softkey. Allow the file to fully load. When installing the sport loader, the screen will display a backdrop for roughly 10 to 20 seconds. When the update is completed, the sport loader will load the main screen.

  • With the disk containing your chosen desktop image in the timer, press the 'Desktop' softkey.

  • Press the 'View files on floppy' softkey.

  • Select your desktop image. The default image is called 's6main.jpg'

  • Press the 'Set file as background' button



    • PaceClock 1.204 - 30 October 2008
     NOTICE!!! This update requires Firmware v1.34 or greater.
    To easily obtain this and all other updates at once, use the System 6 online update system (see instructions).

    Current Release Notes.
  • Added support for USB printing (Requires hardware update)

    • Previous Version Release Notes

    Synchronized Swimming 1.01i - 22 June 2004
    Current Release Notes.
  • No release notes at this time
    •


    DisplayLink Utilities
    Import Start List Utility - 19 December 2005
    Windows 2000 Network Pack Driver

    Countdown Clock
    Countdown Clock - 16 June 2006

    image
    image
    		 image